Yugoslavian mauser k98

It is a Mauser 98 knockoff, if you will, that was manufactured at the Kragujevac Arsenal in the Kingdom of Serbs, Croats, and Slovenes later Yugoslavia and now Serbia beginning in They are ideal shooters. Removing it all effectively can be a monumental task. A rather large hinged pull-catch at the left rear of the action allows bolt removal.

The safety is a three-position type. Rotated to the far right, it locks the bolt and blocks the firing pin. In the center position, the bolt may be opened to clear the chamber and unload the rifle, but the firing pin is still blocked.

Like many battle rifles of yesteryear, when in this vertical center position, the wing-type safety also blocks the line of sight, serving as an instant reminder should the user forget to disengage the safety before trying to fire the rifle. A cleaning rod resides beneath the barrel, and the three-quarter-length stock is fitted with a heat-guard upper half.

The sights are robust and effective for rapid work up close. During slow periods, I spent hour upon hour scouring the Cosmoline from various vintage firearms and categorizing them onto the used-gun rack. A buddy sold me a case of original, corrosive ammo, and I took it out to function-test the rifle. My eyes were young then, and I recall being pleased with the accuracy, but I kept no details about how it shot.

This rifle has matching numbers—those that exist and are visible. To determine just what this rifle is capable of, I dug up a couple of non-corrosive factory loads and headed to the range.

It gave the sights a nice glare-free matte black. Controlling the trigger proved challenging. The Yugoslavians zeroed their battle guns at meters with heavy bullets traveling between 2, and 2, fps.

Diagram based 2005 peterbilt 378 wiring diagram

As a result, many modern loads with light bullets tend to group quite high at yards. That proved to be the case with the Romanian surplus ammo. Even better, it shot well, averaging 2-MOA groups. Reliability was sterling, but then, it is a Mauser.Although supplemented by semi- and fully automatic rifles during World War II, it remained the primary German service rifle until the end of the war in Millions were captured by the Soviets at the conclusion of World War II and were widely distributed as military aid.

The Karabiner 98k therefore continues to appear in conflicts across the world as they are taken out of storage during times of strife. In February the Heereswaffenamt Army Weapons Agency ordered the adoption of a new military rifle. The Karabiner 98k was derived from earlier rifles, namely the Mauser Standardmodell of and the Karabiner 98b, which in turn had both been developed from the Gewehr Since the Karabiner 98k rifle was shorter than the earlier Karabiner 98b the 98b was a carbine in name only, a version of Gewehr 98 long rifle with upgraded sightsit was given the designation Karabiner 98 kurzmeaning "Carbine 98 Short".

The pattern 7. It was found that the s. Patroneoriginally designed for long range machine gun use, produced less muzzle flash out of rifles that had a shorter barrel and also provided better accuracy. Because of this the S Patrone was phased out in and the s. Patrone became the standard German service ball cartridge in the s. The Karabiner 98k is a controlled-feed bolt-action rifle based on the Mauser M98 system.

Its internal magazine can be loaded with five 7. This change made it easier to rapidly operate the bolt, reduced the amount the handle projected beyond the receiver, and enabled mounting of aiming optics directly above the receiver.

Each rifle was furnished with a short length of cleaning rod, fitted through the bayonet stud. The joined rods from 3 rifles provided one full-length cleaning rod. The metal parts of the rifle were blueda process in which steel is partially protected against rust by a layer of magnetite Fe 3 O 4.

Such a thin black oxide layer provides only minimal protection against rust or corrosion, unless also treated with a water-displacing oil to reduce wetting and galvanic corrosion. The impractical "Langevisier" or "rollercoaster" rear sight of the Mauser Gewehr was replaced with a conventional tangent leaf sight. The Karabiner 98k rear tangent sight was flatter compared to and does not obstruct the view to the sides during aiming as the Langevisier long sight.

Originally, the Karabiner 98k iron sight line had an open-pointed-post-type front sight, and a tangent-type rear sight with a V-shaped rear notch. These standard sight lines consisted of somewhat coarse aiming elements, making it suitable for rough field handling, aiming at distant area fire targets and low-light usage, but less suitable for precise aiming at distant or small point targets.

It is graduated for 7. Patrone cartridges loaded with The sight line of early productions rifles have the ranging scale copied at the bottom of the tangent aiming element for setting the range whilst lying down. Early Karabiner 98k rifles had solid walnut wood or from some had solid oak wood one-piece stocks.

From onwards the rifles had laminated stocksthe result of trials that had stretched through the s.

Yugo M24/47 Mauser rifle

The laminated stocks were, due to their dense composite structure, somewhat heavier compared to one-piece stocks. The butts of the semi-pistol grip Karabiner 98k stocks were not uniform.

Until early the stocks had a flat buttplate. After some stocks had a cupped buttplate to prevent the separation of the butt stock. All stocks had a steel buttplate.The main problem that the Yugoslav government had to face was the lack of funds and the fear of an imminent conflict.

A temporary solution was found in refurbishing the rifles that were captured or left over by the Germans. They were noted for their reliability, great accuracy, effective range and would not require a new mass production plant - thanks to the fact that all the components of the rifles were already available. These rifles were never used extensively until they were replaced, inby the Yugoslav-made Zastava M Some of these rifles were used in a sniper rifle role during the Yugoslav Wars of s.

The rifles have been adapted, through machining, to accept new locally-made telescopic sights-the ZRAK series.

Fake denso injectors

These rifles are actually Karabiner 98k rifles that were left over by Germany or captured by Marshal Tito 's partisan armyor Liberation Army. They are virtually identical to each other, since they are still the same rifles at their core. The original German markings were scrubbed and replaced by the Yugoslav ones. The most noticeable markings are the Yugoslav Crest and the "Preduzece 44" It refers to the site where it was refurbished; for example "Preduzece 44" stands for "Institute 44"-Kragujevac, Serbia-the current location of Zastava Arms present on the receiver's ring.

Another noticeable marking is the one present on the left side of the receiver, the "Mod. From Wikipedia, the free encyclopedia. This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Type of Bolt-action rifle.

Categories : Bolt-action rifles Rifles of Yugoslavia 7. Hidden categories: Articles lacking sources from April All articles lacking sources Articles with short description Pages using deprecated image syntax. Namespaces Article Talk. Views Read Edit View history. In other projects Wikimedia Commons. By using this site, you agree to the Terms of Use and Privacy Policy.

Bolt-action rifle. MauserZastava Arms. Iron sights or telescopic sight.Old rifles have a smell all their own; and none more so than military bolt-actions. Preservative grease, gun oil and, doubtless, the blood, sweat and tears of numerous users all combine into an evocative aroma. They are often in poor visible condition, which combined with the distinctive smell makes them a non-starter for many shooters. All sold off as surplus they have found their way into gun shops everywhere, but that patina of grime and looks aside, the majority of rifles that have survived the various global conflicts or even heavy garrison usage are usually in good mechanical condition.

A fact belied by their usually rough outward appearance! Some of which must be down to the common, military syndrome of being much carried and little used. This review was inspired to a degree by Bruce Potts who, as you may know, did an article on building a classic Mauser K98 sniper rifle that he would use for stalking.

I thought I would get an example in to show readers who perhaps might not be aware of what the generic 98 is all about. Things turned out a little different as I achieved my goal but some unexpected seeds of possible ideas were also planted. There are a few different models in terms of length etc, but all use the generic Mauser 98 action. However, I have also seen examples with turned down bolts like the K. Chambered in the rimless 8x57mm 8mm Mauser the rifle feeds from a top-loading, 5-round fixed magazine using stripper clips as was the style of the period.

This gun has doubtless done the rounds as its beech stock could do with some TLC, due to it being dented, scratched, chipped and covered in preservative grease, giving that familiar and unpleasant sticky feel; after shooting rounds this was oozing out of the pores of the timber! However, the woodwork showed no major damage, so no physical problems. Equally the bolt, which was in the white with just a little staining, was tight on closure and smooth in operation, though the handle position makes it less easy to operate from the shoulder than the turned-down style.

The inch barrel is retained by a steel band with bayonet bar and topped with a ramped blade that is windage-adjustable by drifting. Though doubtless lost it should also wear a pressed steel sight tunnel and have a inch length of steel cleaning rod under the barrel.

Sling swivels are included on the forward band and under the butt, with a steel plate at the rear. They also supplied round of PPU grain Match ammo. The trigger is good for a Service gun and offered a mid-weight, 2-stage pull that gave a predictable break of about lbs. Though I did have to clean out the preservative grease in the action, which was increasing lock time noticeably! The rear V and front blade proving fine enough to place precisely.

If it could do that with the basic equipment I reckoned a scope could bring that down to an inch easily. In the course of the test I put 40 rounds through it with no problems and had a very enjoyable time doing so! Or at a classic match and not feel out gunned.

But I might have other plans for this old soldier…. The Yugo proved it could shoot, and underneath its tattered military jacket beats a quality steel heart. I have always had the hankering for a classic Mauser Sporter so am considering a makeover using the existing barrelled action, which has proved itself. This would necessitate a turned-down bolt handle conversion and the fitting of scope bases.

Stock-wise I could cut down and alter the existing furniture, or look for a classic Sporting-style unit. Conversely, I could restore it to its military finish and add a proper sling, cleaning rod and sight protector, so turning it into a good and shootable example of the marque in its original layout. Buying a Gun or Accessory, Choose from 's of items for sale Yugo K98 This review was inspired to a degree by Bruce Potts who, as you may know, did an article on building a classic Mauser K98 sniper rifle that he would use for stalking.I figured I wasn't using good technique and just moved on to a longer-barreled persian mauser that usually hurt less.

2nz engine

I will have to go back to my m48 with different ammo. Yeah, the Yugo surplus is punishing stuff. If you handload, any reputable manual with starting loads for IMR or H will give you nice accuracy and velocity results with less kick. Hi, I really enjoyed your writeup!

Good job! I did notice one thing, though. I chronographed 3 lots of the Yugo 's gr FMJ surplus, and they shot between - fps from a RC 98K with an excellent bore.

Out of curiosity, I then chronographed 5 rds of genuine, pristine German WW2 steel-cased ball gr that came in their original box. These were noticeably hotter, and chrono'ed fps average. BTW, I also tested some of the Romanian light ball gr. The recoil of these was very mild; they barely broke fps, but their accuracy in the RC 98K and a Yugo M48A was significantly poorer than with heavy ball. Hope this helps!

I am little bit confused about this Gun name with the one i have. It is still my all time favorite. I think this gives a good history to the Mauser i have one as well but i dont k.

If you send a picture of it to jfvac yahoo. I'm no expert, but I'm pretty familiar with Mausers in general. I have a brand spanking new barrel for the M48 22inches long.

Nickfinder apodos

I dont want to brake in to my original M So my question is, can I use M47 reciever instead of M Thanks in advance. Respectfully Ivan. Thank you for your article. It is an excellent background sketch. I have a M48B that I bought for a few years ago, with percent bluing and very little wear on the stock. I did sand it lightly, but still feel that there is a large amount of creosote still in the wood.

It was a revelation to get such a fine looking rifle for that amount of money. Yeah, I don't think its possible to get all the goop out of these stocks without heavy chemical stripping and sanding. Mine weeps a bit when I shoot it still. Oh well. They are indeed fine rifles, though. Great info. I have a perfect m48 and I did notice the difference in the surplus ammo.

Siulo darba

I am now officially a mouser guy!Sure, there are other great designs like the Swiss K31 and British SMLE, but no series of rifles has been more consistently excellent like the ones that are based on the Mauser 98 action. Mauser sued over it too but got sidetracked by a little dust-up known as World War I. One of the best examples of the Mauser series was not manufactured in Germany, but in Yugoslavia in the late s and s.

As part of the reparations Germany had to pay after World War II, Yugoslavia received tooling and equipment to make the Mauser 98, specifically the Karabiner 98 kurz K98k or KAR 98 version which was the standard-issue infantry rifle for the Wehrmacht right through the end of the war.

Even though the bolt action infantry rifle was pretty much obsolete by then, the Yugoslavians set up the Preduzece 44 facility part of Zastava to manufacture what became the M48 Mauser variant. The M48 was not a carbon copy of the K98k, though there are similarities. The M48 is not quite an inch shorter in overall length, measuring The weight of both rifles can vary by a few ounces either way.

The listed weight for the K98k is 8. The M48 is in the same range, with 8.

Zastava M 98/48

According to my scale, my M48B comes in at 8. Several features of the rifles are different too. The upper handguard on the M48 covers the barrel all the way back to the receiver, while the K98k only goes back to the front edge of the rear sights. Maybe not a big deal, but the barrel gets damned hot after a few rounds and that extra protection is nice when handling the weapon after putting it through its paces. The bolt handle is curved at approximately an degree angle, unlike the K98k, which is turned down at an angle sharp enough to prompt the need for a cutout in the stock to accommodate it.

yugoslavian mauser k98

The handle is shaved flat on the underside, a feature I really like. The significance lies in that the two are not interchangeable, as are the standard size 98 bolts subject to caliber, wear, and headspace. The M48 bolt is interchangeable with the earlier Serbian-produced M24 Mauser variant, which is also of the intermediate length.

Sanwu bluetooth receiver

Again, interchangeability is subject to wear and headspace. The action itself, along with quality manufacture, is the secret to the success of the Mauser.

yugoslavian mauser k98

The product of years of development by Paul Mauser and his late brother Wilhelm, even today the 98 action may well be the apex of the bolt action rifle system. The action is so robust that, when produced with proper materials, it can handlepounds of pressure and still remain operational.

Other innovations of the Mauser 98 action are the powerful claw extractor, first developed inand the pound mainspring driving the firing pin. One of the most recognizable features of the Mauser action is the three-position safety at the rear of the bolt.

The first position, to the left, renders the rifle fully operational. The second position, straight up, disengages the trigger mechanism but allows the action to cycle, allowing for easy and safe unloading, or for the operator to safely remove the bolt for inspection or troubleshooting without unloading the rifle, which is useful in the field. The third position, to the right, disengages the trigger and locks the bolt entirely.

The safety is milled steel, very robust, highly visible, and easily operated. Modern high end Mauser hunting rifles still use the 98 action with a version of this safety mechanism.

Another interesting feature of the action is the ability to decock the action without dry-firing the weapon. Lifting the handle cocks the bolt, but lowering the handle with the trigger pulled decocks it.

This is a useful capability when cleaning or servicing the action. The system features a five-round internal box magazine.

Rounds can be loaded individually or by a stripper clip. What is true is that Mauser greatly improved upon the design of the clips and the 98 system may be the first to allow the clip to be discarded simply by closing the bolt after loading the rounds.

Unlike the K98k, the follower does not cause the bolt to lock open after firing the last round.Remember Me? What's New?

Yugoslavian M48 8mm Mauser

Forum Gunboards. Results 1 to 38 of Thread: yugo captured K Join Date Feb Posts I'm new to collecting MilSurp guns and have the opportunity to purchase a Yugo captured k98 in what looks like very good shape. I missed out on a GI bringback in auction a few days ago and want a K98 pretty bad. Is the Yugo bring capture not as desired as a Russian capture? Obviously, should have out bid the turkey who got the GI bring back.

In general, a yugo rework k98k is lower and less valuable on the collecting totem pole then a RC k98k. Having said that, many received brand new barrels and they make for excellent shooting examples. How much are you considering on spending for the yugo? Must have MINT bore. Or a receiver or barreled receiver. Looking for a late round hole Mauser Oberndorf complete matching bolt, serial Looking for a original matching BNZ 45 "T" block bolt.

Right now Sponsored Links Remove Advertisements. Join Date Dec Posts 1, As long as you don't mind the scrubbed receiver, there is nothing wrong with a Yugo capture. While often worn, they can have matching numbers and very good bores. They are mechanically fine rifles, like any other German made Mauser. They have a history of their own, different than other guns, but still worthwhile. Join Date Oct Location in a house Posts 4, That seems a shade high, but it may be the "new normal".

yugoslavian mauser k98

Some Yugo K98k's look unissued after rework and have new barrels. I'd consider one of those to be a much better shooter than an RC parts gun. Not to start any arguments, but I beg to differ on the statement that Yugo reworks are less valuable than a russian capture rifle.


thoughts on “Yugoslavian mauser k98

Leave a Reply

Your email address will not be published. Required fields are marked *